Muzzle Devices

Limited time only! All muzzle devices discounted 25%!

Grid List

Set Descending Direction

1-10 of 13

  1. Muzzle Device Alignment Set- .308

    Muzzle Device Alignment Set- .308

    $4.95
    This PWS shim kit is a replacement for the peel washer and is used for mounting muzzle brakes and flash suppressors. New muzzle brakes normally supplied with the necessary washers, nuts, or shims; however sometimes replacement washers are needed if one is damaged or if installing a muzzle device on a different gun. While Peel washers require you to heat them and then peel off separate layers of the washer to get to the desire thickness, a Shim Kit is much simpler. There is no heating or peeling of layers needed. Just install the necessary combination of shims to get the precise alignment you need. Each shim set ships with QTY 1 of Shim 1 (largest), QTY 8 of Shim 2 (medium), and QTY 1 of Shim 3 (smallest). The large shim can be used to give the installer one half of a rotation or as a spacer for barrels that do not have relief cuts behind the threads. Shim 2 is used in varying quantities to achieve the proper alignment of your muzzle device. This shim gives the installer approximately 45 degrees of rotation. If needed, Shim 3 can be used where smaller degrees of rotation are needed for proper alignment. NOTE: All PWS muzzle devices ship with appropriate hardware, these do NOT need to be purchased in addition to a compensator. These are for spare parts kits and other uses. Learn More
  2. Muzzle Device Alignment Set- .223

    Muzzle Device Alignment Set- .223

    $4.95
    This PWS shim kit is a replacement for the peel washer and is used for mounting muzzle brakes and flash suppressors. New muzzle brakes normally supplied with the necessary washers, nuts, or shims; however sometimes replacement washers are needed if one is damaged or if installing a muzzle device on a different gun. While Peel washers require you to heat them and then peel off separate layers of the washer to get to the desire thickness, a Shim Kit is much simpler. There is no heating or peeling of layers needed. Just install the necessary combination of shims to get the precise alignment you need. Each shim set ships with QTY 1 of Shim 1 (largest), QTY 8 of Shim 2 (medium), and QTY 1 of Shim 3 (smallest). The large shim can be used to give the installer one half of a rotation or as a spacer for barrels that do not have relief cuts behind the threads. Shim 2 is used in varying quantities to achieve the proper alignment of your muzzle device. This shim gives the installer approximately 45 degrees of rotation. If needed, Shim 3 can be used where smaller degrees of rotation are needed for proper alignment. NOTE: All PWS muzzle devices ship with appropriate hardware, these do NOT need to be purchased in addition to a compensator. These are for spare parts kits and other uses. Learn More
  3. Sale

    JTAC 47 Compensator

    JTAC 47 Compensator

    Regular Price: $57.95

    Special Price $43.46

    The JTAC47 was the first muzzle device created by PWS and remains one of our most popular to this day. Specifically made for the AK47, the JTAC47 reduces felt recoil without a significant increase in blast noise being directed toward the shooter or individuals next to the shooter. Learn More
  4. Sale

    PCC Compensator- 9mm (1/2x28)

    PCC Compensator- 9mm (1/2x28)

    Regular Price: $57.95

    Special Price $43.46

    Brand new for 2018, the PCC Compensator was designed specifically for PCC firearms. Offering a different porting design from other PWS muzzle devices, the PCC redirects gasses upward in an effort to offset the muzzle rise unique to pistol caliber carbines. By providing multi axis porting as the bullet exits, the PCC compensator delivers superior muzzle stabilization and fast follow up shots. Learn More
  5. Sale

    PCC Compensator- 9mm (1/2x36)

    PCC Compensator- 9mm (1/2x36)

    Regular Price: $57.95

    Special Price $43.46

    Brand new for 2018, the PCC Compensator was designed specifically for PCC firearms. Offering a different porting design from other PWS muzzle devices, the PCC redirects gasses upward in an effort to offset the muzzle rise unique to pistol caliber carbines. By providing multi axis porting as the bullet exits, the PCC compensator delivers superior muzzle stabilization and fast follow up shots. Learn More
  6. Sale

    CQB74 Compensator- .308 (24x1.5mm)

    CQB74 Compensator- .308 (24x1.5mm)

    Regular Price: $149.95

    Special Price $74.45

    This item ships in OEM packaging, not retail packaging Cannon Store Parts may have cosmetic blems such as machining marks, pock marks, and other small imperfections. Learn More
  7. Sale

    PRC Compensator- 30 (5/8x24)

    PRC Compensator- 30 (5/8x24)

    Regular Price: $99.95

    Special Price $74.96

    The PRC compensator, originally introduced for .30 only, was designed to reduce felt recoil as much as possible. Redesigned in 2018, now in a variety of caliber options, this compensator is very effective in reducing felt recoil, while being California compliant. The PRC design produces a low ground signature and overpressure to the shooter It also gives ultimate control for seeing impacts through your optic and stabilizes follow up shots. Learn More
  8. Sale

    FSC Compensator- 47 (14x1 LH)

    FSC Compensator- 47 (14x1 LH)

    Regular Price: $99.95

    Special Price $74.96

    The patented FSC compensator was designed to be an effective compensator for shooters in all situations. Offering recoil reduction as a primary function, and flash suppression as a secondary function, the FSC is one of the most popular PWS compensators on the market. The unique port designs effectively keep flash out of optics and line of sight, while also reducing the distracting overpressure that is felt with many compensators. Learn More
  9. Sale

    FSC Compensator- 556 (1/2x28)

    FSC Compensator- 556 (1/2x28)

    Regular Price: $99.95

    Special Price $74.96

    The patented FSC compensator was designed to be an effective compensator for shooters in all situations. Offering recoil reduction as a primary function, and flash suppression as a secondary function, the FSC is one of the most popular PWS compensators on the market. The unique port designs effectively keep flash out of optics and line of sight, while also reducing the distracting overpressure that is felt with many compensators. Learn More
  10. Sale

    PRC Compensator- 556 (1/2x28)

    PRC Compensator- 556 (1/2x28)

    Regular Price: $99.95

    Special Price $74.96

    The PRC compensator, originally introduced for .30 only, was designed to reduce felt recoil as much as possible. Redesigned in 2018, now in a variety of caliber options, this compensator is very effective in reducing felt recoil, while being California compliant. The PRC design produces a low ground signature and overpressure to the shooter It also gives ultimate control for seeing impacts through your optic and stabilizes follow up shots. Learn More

Grid List

Set Descending Direction

1-10 of 13